Welcome, Guest: Login or Register My Cart (0)

Understanding Polarization

Download the PDF version


1. Introduction

Polarization is a fundamental property of light. While many optical applications are based
on systems that are “blind” to polarization, a very large number are not. Some applications rely
directly on polarization as a key measurement variable, such as those based on how much an
object depolarizes or rotates a polarized probe beam. For other applications, variations due to
polarization are a source of noise, and thus throughout the system light must maintain a fixed
state of polarization – or remain completely depolarized – to eliminate these variations. And for
applications based on interference of non-parallel light beams, polarization greatly impacts
contrast. As a result, for a large number of applications control of polarization is just as critical
as control of ray propagation, diffraction, or the spectrum of the light.
Yet despite its importance, polarization is often considered a more esoteric property of light
that is not so well understood. In this article our aim is to answer some basic questions about
the polarization of light, including: what polarization is and how it is described, how it is
controlled by optical components, and when it matters in optical systems.

2. A description of the polarization of light

To understand the polarization of light, we must first recognize that light can be described as
a classical wave. The most basic parameters that describe any wave are the amplitude and the
wavelength. For example, the amplitude of a wave represents the longitudinal displacement of
air molecules for a sound wave traveling through the air, or the transverse displacement of a
string or water molecules for a wave on a guitar string or on the surface of a pond, respectively.
We will refer to the amplitude of a light wave with the letter “E.” The amplitude of a light wave
represents the potential for a charged particle (such as an electron) to feel a force – formally it
may represent the “electric field” of an electromagnetic wave. Because this potential vibrates
along the directions transverse to the direction the wave is traveling, light is a “transverse wave,”
just like the waves on a string or water surface.

Because light is a transverse wave, and because there are two transverse dimensions,
there are fundamentally two distinct directions in which the light wave may oscillate. Let’s call
these the x and y directions for a light wave traveling along the z direction. We’ll call the two
distinct waves Ex and Ey, where we denote these by vectors to remind us that they point in (or
oscillate along) a certain direction (the x and y directions, respectively).

The amplitude of the light wave describes how the wave propagates in position and time.
Mathematically, we can write it as a “sine wave” where the angle of the sine function is a linear
combination of both position and time terms:

where A is called the “amplitude factor,” the variable l (“lambda”) is the “wavelength” (units of
nm), and the variable v (“nu”) is the “frequency” (units of Hz, or sec–1). If a snapshot of the wave
could be taken at a fixed time, l would be the distance from one wave peak to the next. If one
sits at a fixed point in space and counts the wave peaks as they pass by, v gives the frequency
of these counts, or 1/v gives the time between peaks. The sign between the position and time
terms determines the direction the wave travels: when the two terms have the opposite sign
(i.e., the “–” sign is chosen), the wave travels in the positive z direction.
For convenience we often use two new variables called the “wavenumber” k = 2p/l and the
“angular frequency” 2pv (“omega”), which absorb the factor of 2p, so that the wave
amplitude can now be written more compactly as

Using this description of a single transverse orientation of a light wave, we can now consider
multiple orientations to describe different states of polarization.

a. Linear polarization – equal amplitudes

Here is an example of the two waves Ex and Ey viewed in a “fixed time” picture (say at t = 0):

The amplitude E, or the potential for a charged particle to feel a force, is vibrating along both the
x and y directions. An actual charged particle would feel both of these fields simultaneously, or
it would feel

If we look down the propagation axis in the positive z direction, the vector E at various locations
(and at t = 0) looks like:

That is, E appears to oscillate along a line oriented at 45° with respect to the x axis. Hence this
situation is called linear polarization.

Notice that equivalently we could view the wave at a particular location (“fixed position”) and
watch its amplitude evolve with time. Suppose we sit at the position z = 0. Then we see that

which looks like:

The amplitude oscillates back and forth along the same 45° line as time evolves.

b. Linear polarization – unequal amplitudes

What if the two components Ex and Ey have unequal amplitude factors? We can see that
the light wave is still linearly polarized.

If Ax  Ay , the total wave E is linearly polarized, but it is no longer oriented at 45° with respect
to the x axis. In fact we can see that it is oriented at an angle  where

In other words, if we look down the propagation axis in the positive x direction, the vector E at
various locations (and at t = 0) now looks like:

c. Circular polarization

Suppose the two components have equal amplitudes again, but now consider the case
where these two components are not in phase, such that the angles of the sine functions are
different. In particular, suppose there is a constant phase difference of p/2 between them,
which corresponds to a distance of l/4 in the “fixed time” picture. The x component is

while the ycomponent is as before

This case looks like:

To understand what is going on physically, again look down the zaxis (at time t = 0).

We can see that the tip of E traces out a circle as we follow the wave along the z axis at a
fixed time. Similarly, if we sit at a fixed position, the tip of E appears to trace out a circle as time
evolves. Hence this type of polarization is called circular polarization.

d. Elliptical polarization

All of the states of polarization described above are actually special cases of the most
general state of polarization, called elliptical polarization, in which the tip of the electric field
vector E traces out an ellipse in the x-y plane. The two components might have unequal
amplitudes Ax  Ay , and also might contain a different relative phase, often denoted That is,
we may write generally

while the y component is as before

and where, as before, EEx< + Ey. The three special cases described in sections a, b, and c
above thus correspond to: (a) Ax = Ay and  = 0 (linear polarization; equal amplitudes); (b)
<Ax  Ay  and  = 0 (linear polarization; unequal amplitudes); and (c) Ax = Ay with  = –p/2
(circular polarization). Some other examples of more general states of elliptical polarization are
shown below.

3. Changing the polarization of light

Unpolarized light can be polarized using a “polarizer” or “polarizing beamsplitter,” and the
state of already polarized light can be altered using a polarizer and/or optical components that
are “birefringent.” In this section we explore some examples of these types of components.

a. Polarizers and polarizing beamsplitters

A polarizer transmits only a single orientation of linear polarization, and blocks the rest of the
light. For example, a polarizer oriented along x passes x and blocks Ey.

Some polarizers eliminate the non-passed polarization component (Ey in the above example) by
absorbing it, while others reflect this component. Absorbing polarizers are convenient when it is
desirable to completely eliminate one polarization component from the system. A disadvantage
of absorbing polarizers is that they are not very durable and may be damaged by high intensity
light (as found in many laser applications).

When a reflective polarizer is operated in such a way that the blocked (i.e., reflected)
polarization component is deflected into a convenient direction, such as 90° relative to the
transmitted polarization component, then the polarizer acts like a polarizing beamsplitter, as
shown below.

Most polarizing beamsplitters are very efficient polarizers for the transmitted light (i.e., the ratio
of desired to undesired polarization is very high); however, the reflected light generally contains
some of both polarization components.

How does a polarizer work? There are different ways of making a polarizer, and they are
not described in detail here (see [1] for more examples). However, as an example consider one
of the most popular absorbing polarizers: the well-known Polaroid “H-Sheet.” This polarizer,
invented by E. H. Land in 1938, is a plastic, Poly-Vinyl Alcohol (PVA) sheet that has been
heated and then stretched in one direction, forming long, nearly parallel hydrocarbon molecule
chains. After dipping the sheet into an iodine-rich ink, long iodine chains form along the hydrocarbon
molecules. Electrons freely move along the iodine chains, but do not easily move
perpendicular to the chains. This ability for electrons to move freely in one direction but not the
perpendicular direction is the key principle upon which most absorbing polarizers are based.

When the electric field of a light wave encounters the sheet, the component parallel to the
chains causes electrons to oscillate along the direction of that component (Ey in the above
example), thus absorbing energy and inhibiting the component from passing through the sheet.
Because electrons can not respond to the other component (Ex), it is readily transmitted.

b. Birefringence

Some materials have a different index of refraction for light polarized along different
directions. This phenomenon is called birefringence. For example, suppose light polarized
along the x direction sees an index of nx, while light polarized along the y direction sees an index
ny. Now suppose linearly polarized light passes through a piece of such a material of length L,
where the linear polarization axis is oriented at 45° with respect to the x and y axes. The fixed
time picture thus looks like:

We can see that in general the light emerges in a different state of elliptic polarization. In fact,
for the example illustrated above, the particular choice of L for a given difference between nx
and ny causes the linearly polarized light at the input end to be converted to circularly polarized
light at the other end of the birefringent material. How did this happen?
Let’s look at the math. Consider the phases accumulated by the two component waves as
they travel through the birefringent material. The waves can be described by

After traveling a length L, the waves have accumulated respective phases of

If the difference between the two phase values is p/2, then the wave emerging from the material
(say into air) will be circularly polarized. This occurs when

or when

Because of this relationship, a material with birefringence Dn of the appropriate thickness L to
convert linear polarization to circular polarization is called a quarter-wave plate.

What causes materials to be birefringent? Some materials, especially crystals, are naturally
anisotropic at microscopic (sub-wavelength) size scales. For example, Calcite (CaCO3) is
shown in the drawing below. The structure, and hence the response to polarized light, along the
c direction is markedly different than that along the a and b directions, thus leading to a different
index of refraction for light polarized along this direction.

Other materials are nominally isotropic, but when they are bent or deformed in some way, they
become anisotropic and therefore exhibit birefringence. This effect is widely used to study the
mechanical properties of materials with optics.

4. Effects of reflection and transmission on polarization

The polarization of light reflected and transmitted at an interface between two media or at a
thin-film multilayer coating can be altered dramatically. These two cases are considered below.

a. Polarization dependence of light reflected or transmitted at an interface

When light is incident on an interface between two different media with different indexes of
refraction, some of the light is reflected and some is transmitted. When the angle of incidence is
not normal, different polarizations are reflected (and transmitted) by different amounts. This
dependence was first properly described by Fresnel, and hence it is often called “Fresnel
Reflection.” It is simplest to describe the polarization of the incident, reflected, and transmitted
(refracted) light in terms of a vector component perpendicular to the plane of incidence, called
the “s” component, and a component parallel to the plane of incidence, called the “p”
component. The “plane of incidence” is the plane which contains the incident ray and the
transmitted and reflected rays (i.e., all of these rays lie on one plane). In the example in the
diagram below, the plane of incidence is the plane containing the x and z axes. That is, Es || y,
while Ep lies in the x-z plane.

The angle of the reflected ray,θr, is always equal to the angle of the incident ray, θi, this result is
called the “law of reflection.” The angle of the transmitted (or refracted) ray, θT, is related to the
angle of incidence by the well-known “Snell’s Law” relationship: ni sin θinbsp;= nt sin θT.
It turns out that s-polarized light is always more highly reflected than p-polarized light. In
fact, at a special angle called “Brewster’s Angle,” denoted θB, the p-polarized component sees
no reflection, or is completely transmitted. Brewster’s angle is given by θ= arctan(nt/ni). The
power or intensity reflection coefficients for a light wave (i.e., the squares of the amplitude
reflection coefficients) for air-to-glass (left) and glass-to-air (right) look like:

The Fresnel reflection coefficients for non-normal incidence are given by the equations

Notice from the graph above on the right that for the case of reflection from a higher-index
region to a lower-index region (in this case glass-to-air, or ni = 1.5 and nt = 1.0), the reflectivity
becomes 100% for all angles greater than the “critical angle” θ= arcsin(nt/ni) and for both
polarizations. This phenomenon is known as “Total Internal Reflection” (TIR).

For angles of incidence below the critical angle only the amplitudes of the different
polarization components are affected by reflection or transmission at an interface. Except for
discrete changes of p (or 180°), the phase of the light is unchanged. Thus, the state of
polarization can change in only limited ways. For example, linearly polarized light remains
linearly polarized, although its orientation (angle ) may rotate. However, for angles greater
than θc, different polarizations experience different phase changes, and thus TIR can affect the
state of polarization of a light wave in the same way birefringence does. Thus linearly polarized
light may become elliptical, or vice versa, in addition to changes in the orientation.

b. Polarization dependence of light reflected or transmitted at a multilayer thin-film coating

Multilayer thin-film coatings have a large number of interfaces, since they are generally
comprised of alternating layers of a high- and low-index layer materials. The fraction of incident
light intensity Iin that is reflected (IR) and transmitted (IT) through a thin-film coating can be
calculated from the indexes of refraction and the precise thicknesses of each layer. These
intensity reflection and transmission functions R(l) and T(l), respectively, generally depend
strongly on the wavelength of the light, because the total amount of light reflected from and
transmitted through the coating comes from the interference of many individual waves that arise
from the partial reflection and transmission at each interface. That is why optical filters based
on thin-film coatings are called “interference filters.”

When an optical filter is used at a non-normal angle of incidence, as is common with socalled
“plate beamsplitters,” the filter can impact the polarization of the light. If the incident light
is incoherent and unpolarized, and the optical system is “blind” to polarization, the standard
intensity reflection and transmission functions R(l) and T(l) may be determined for the new
angle of incidence, and they are sufficient to characterize the two emerging beams.

However, if the optical system is in any way sensitive to polarization, even when the incident
light is unpolarized, it is important to recognize that the beamsplitter can transmit and reflect
different amounts of the “s” and “p” polarization states, as shown below.

The amount of light output in each polarization state can be determined by simply breaking up
the incident light into its two polarization components (s and p), and then calculating how much
of each intensity is transmitted and reflected. For systems based on incoherent light, this level
of detail is usually sufficient to keep track of the impacts of components like optical filters on

For some optical systems – particularly those based on coherent light and that utilize or are
sensitive to interference effects, for example – the complete state of polarization should be
tracked at every point through the system. In that case, it is important to understand that optical
filters based on multilayer thin-film coatings not only reflect and transmit different amounts of
intensity for the s and p polarization states, but also impart different phases to the two different
states. And both the amplitude and phase contributions can depend strongly on the wavelength
of light. Thus, in general, an optical filter can act like the combination of a partial polarizer and a
birefringent waveplate, for both reflected and transmitted light.

To determine the effect of an optical filter on the light in such a system, the incident light
should first be broken up into the two fundamental components associated with the plane of
incidence of the filter (s and p components). Then, the amplitude and phase responses of the
filter for the s and p components should be applied separately to each of the incident light
components to determine the amplitudes and phases of the reflected and transmitted light
components. Finally, the reflected s and p components can be recombined to determine the
total reflected light and its state of polarization, and likewise for the transmitted light. These
steps are illustrated in the diagram below.

Because the polarization response of a tilted multilayer thin-film coating can be very strong,
optical filters can make excellent polarizers. For example, a basic edge filter at a high angle of
incidence exhibits “edge splitting” – the edge wavelength for light at normal incidence shifts to a
different wavelength for p-polarized light than it does for s-polarized light. As a result, there is a
range of wavelengths for which p-polarized light is highly transmitted while s-polarized light is
highly reflected, as shown below.

It is also possible to take advantage of an appreciable difference in reflected or transmitted
phase for p- and s-polarized light over a region of the spectrum where the reflected and
transmitted intensities are essentially equal, thus forming a waveplate.

5. Concluding remarks

Polarization is a critical property of light for many optical systems and applications. This
brief tutorial summarizes some of the most basic aspects of polarization, including how it is
described, the impact of polarizing and birefringent elements on light, and how optical interfaces
and filters can change the polarization of light.

6. References

[1] “A New Class of Polarization Optics Designed Specifically for Lasers,” Semrock White Paper
Series, www.semrock.com.


Turan Erdogan, Ph.D., is a co-founder and CTO at Semrock, Inc., A Unit of IDEX Corporation.
e-mail: terdogan@idexcorp.com; Tel: (585) 594-7001; Fax: (585) 594-7095

Polarization-light Polarization Plate-Polarizer Polarizer Glass-film-polarizer