 | BrightLine® Pinkel filter set, optimized for DAPI, FITC, & Texas Red and other like fluorophores, illuminated with LED-based light enginesSemrock’s LED-based light engine filter sets are designed to use common excitation filters between single-band and corresponding multiband configurations to simplify interchangeability when installing the excitation filters into the light engine. This not only provides seamless transition between using single-band and multiband filter sets but also provides significant cost savings.
This 5-filter "Pinkel" triple-band set is designed for imaging of a sample that is simultaneously labeled with DAPI, FITC, and Texas Red, (or other key fluorophores – see complete list above). This set has been designed to deliver significant fluorescence signal improvements for LED-based light engines, including 365 nm DAPI LEDs, compared with traditional sets designed for standard broadband light sources such as mercury or xenon arc lamps. The complete set is comprised of a triple-band beamsplitter and a triple-band emitter (these can be offered assembled in a microscope cube), plus three "no burn-out" single-band exciters that are intended to be mounted in the LED-based light engines, or in an exciter filter wheel or slider.
Interested in learning how this filter set will perform with your light source? Try Semrock's SearchLight plotting & calculation tool. |
Individual filters and filter sets (no cube):
These filters sets contain individual filters. For filter sets already mounted in a holder/cube, scroll down to see complete mounted sets with cubes.
1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest
regional distributor for the correct list price.
2) Customers installing filters into their own Nikon Quadfluor cubes should
contact us before ordering a filter set.
Complete filter sets mounted in microscope holders/cubes:
These sets are delivered already mounted in microscope filter holders, often called 'cubes', ready to be dropped into your microscope.
Nikon Quadfluor for microscopes: E200, E400, E600, E800, E1000, TS100, TS100F, TE200, TE300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series
Nikon TE 2000 for microscopes: TE 2000, 50i, 55i, 80i, 90i, Eclipse Ti, Ni, and Ci series, and any using the Epi-fluor Illuminator
Olympus U-MF2 for microscopes: AX70, BX, BX41, BX50, BX51, BX60, BX61, BX50/51WI, BX60/61WI, IX50, IX51, IX70, IX71, IX81
Olympus U-FF for microscopes: BX53, BX63
Zeiss FL Cube EC P+C for microscopes: Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner and Axio Scope A1
Leica DM-K for microscopes: DM-2000, DM-2500, DM-3000, DMI3000 B, DM-4000, DMI4000 B, DM-5000, DM-5500, DM-6000, DMI6000 B, DM4 and DM6
Leica DMi8 (P-Cube) for microscopes: DMi8
1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest
regional distributor for the correct list price.