Welcome, Guest: Login or Register My Cart (0)
Item has been Discontinued. See Other Parts to Consider tab below.

350 - 1100 nm MaxMirror® ultrabroadband mirror

Part Number: MM1-311-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Optical Specifications
SpecificationValue
Reflection Band 1Rabs > 99% 350 – 1100 nm
Reflection Band 1 (s-pol)Rabs > 98.5% 350 – 1100 nm
Reflection Band 1 (p-pol)Rabs > 98.5% 350 – 1100 nm
Angle of Incidence0.0 ± 5 degrees & 45.0 ± 2.5 degrees
Reflection Band 1 (wide angle)Rabs > 98.5% 350 – 1100 nm
Reflection Band 1 (wide angle, s-pol)Rabs > 98% 350 – 1100 nm
Reflection Band 1 (wide angle, p-pol)Rabs > 98% 350 – 1100 nm
Angle of Incidence (wide)0 – 50 degrees

General Filter Specifications
SpecificationValue
Optical Damage Rating1 J/cm2 @ 355 nm (10 ns pulse width), 2 J/cm2 @ 532 nm (10 ns pulse width), 6 J/cm2 @ 1064 nm (10 ns pulse width)
Pulse DispersionThe MaxMirror will not introduce appreciable pulse broadening for most laser pulses that are > 1 picosecond; however, pulse distortion is likely for significantly shorter laser pulses, including femtosecond pulses.
Flatness (25 mm & 25.4 mm parts)0.1 waves/inch
Flatness (50.8 mm parts)0.25 waves/inch

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25.0 mm
Transverse Dimensions 2 (Diameter)25.4 mm
Transverse Dimensions 3 (Diameter)50.8 mm
Transverse Tolerance (unmounted)+ 0.0 / - 0.25 mm
Filter Thickness (unmounted)9.5 mm
Filter Thickness Tolerance (unmounted)± 0.25 mm
Clear Aperture≥ 80%
Scratch-Dig20-10
Substrate Thickness (unmounted)9.5 mm
Substrate Thickness Tolerance (unmounted)± 0.25 mm

Closest Alternate Filter

MM3-311-t6.png

350 - 1100 nm MaxMirror® ultrabroadband mirror

• Ravg > 99% 350 – 1100 nm
• 0 – 50 degrees operating range
• Best flatness MaxMirror & 20-10 Scratch-Dig
• 1/10 wave P-V per inch flatness on 6mm


Custom sizing available in less than a week (sizing fee applies).
Part # MM3-311-t6-25
$349
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers

MM1-311 MaxMirror MM1

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.