Welcome, Guest: Login or Register My Cart (0)

457.9 nm MaxLine® laser clean-up filter

Part Number: LL01-458-12.5

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: LL01-458
457.9 nm MaxLine® laser clean-up filter
MaxLine laser-line filters transmit greater than 90% of the light at a precisely defined laser line, while offering incredibly steep edges to eliminate optical noise from non-lasing (plasma) lines and spontaneous emission.
Part NumberSizePrice1Stock StatusQuantity
LL01-458-12.512.5 mm x 3.5 mm$325In StockAdd To Cart
LL01-458-2525 mm x 3.5 mm$650In StockAdd To Cart

Don’t see a size you need? Create your own custom sized part – delivery confirmed ARO.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
Housed / Mounted
Diameter: mmDimension 1: mm
Dimension 2: mm 
Edge Blacken:
Add To CartPrice Each:
Size Fee:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 25mm
Rectangular Dimensions: 5mm - 25mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK

1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
Transmission Band 1Tabs > 90% 457.9 nm
Center Wavelength 1457.9 nm
Guaranteed Minimum Bandwidth 1Transmission guaranteed for laser wavelength only
FWHM Bandwidth 1 (nominal)1.7 nm (typical); 3.2 nm (maximum)
Blocking Band 1ODabs > 5 393.1 – 453.3 nm
Blocking Band 2ODabs > 6 421.3 – 451 nm
Blocking Band 3ODabs > 6 464.8 – 503.7 nm
Blocking Band 4ODabs > 5 462.5 – 576.7 nm

General Filter Specifications
Laser Wavelength 1457.9 nm
Angle of Incidence0 ± 2 degrees
Cone Half-angle0.5 degrees
Optical Damage Rating0.1 J/cm2 @ 532 nm (10 ns pulse width)
Filter Effective Index1.98 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
Transverse Dimensions (Diameter)12.5 mm
Transverse Dimensions 2 (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)3.5 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 10 mm
Clear Aperture 2≥ 22 mm
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Edge Filters


458 nm RazorEdge® ultrasteep long-pass edge filter

• Laser Wavelength = 457.9 nm
• 216 cm-1 transition
• Tavg > 93% 463.9 – 1032.9 nm

Custom sizing delivery confirmed ARO (sizing fee applies).
Part # LP03-458RU-25
(Non-US pricing info)


441.6 & 457.9 nm EdgeBasic™ best-value long-pass edge filter

• Filter with 50% edge at 466 nm
• 552 cm-1 transition avg > 93% from 470.7 – 900 nm

Custom sizing delivery confirmed ARO (sizing fee applies).
Part # BLP01-458R-25
(Non-US pricing info)

Dichroic Beamsplitters


442 nm laser BrightLine® single-edge laser dichroic beamsplitter

• Laser Dichroic Beamsplitter with edge at 462 nm
• Rabs > 94% 439 – 457.9 nm
• Ravg > 90% 350 – 439 nm
• Tavg > 93% 466.1 – 900 nm
• Flatness / RWE: Laser

Custom sizing delivery confirmed ARO (sizing fee applies).
Part # Di02-R442-25x36
(Non-US pricing info)

US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Measuring Light with Wavelengths & WavenumbersCompares units of wavelength to wavenumbers and provides formulas for calculating wavenumber shift
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD
Filter Spectra at Non-normal Angles of IncidenceDiscusses how angle tuning affects the spectral response of different types of filters.
Filter Types for Raman Spectroscopy ApplicationsCompares the performance of different combinations of LWP and SWP edge filters, notch and laser line filters for Raman applications
RazorEdge Filter LayoutsDescribes two different filter layouts that are commonly used in Raman applications
Journal Article
Thin-Film Filters for Raman SpectroscopyTuran Erdogan, PhD, and Victor Mizrahi, PhD, Semrock Inc., Spectroscopy, December 2004
Describes the types and functions of filters commonly used in Raman spectroscopy
Raman SpectroscopyAn overview of Raman spectroscopy, including solutions from Semrock and additional learning resources.

458 MaxLine LaserLine Laser clean-up filter cleanup Laser-line LL01-458 LL01 Line LL01-458-12.5 LL01-458-25

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.