Welcome, Guest: Login or Register My Cart (0)

700 nm edge BrightLine® multiphoton short-pass dichroic beamsplitter

Part Number: FF700-SDi01-25x36

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: FF700-SDi01  FF700  SDi01
700 nm edge BrightLine® multiphoton short-pass dichroic beamsplitter
Semrock offers a wide range of dichroic beamsplitters optimized for pulsed lasers used in multiphoton applications. These multiphoton dichroics have low GDD that helps minimize temporal pulse broadening of reflected laser beams while exhibiting steep edges with very high and flat reflection and transmission bands. This laser dichroic beamsplitter is optimized for reflecting laser beams up to 2.5 mm in diameter while minimizing RWE.

These are ideal solutions for femtosecond pulsed lasers such as Ti:Sapphire (& OPO coupled), neodymium- and ytterbium-doped fiber and glass lasers, enabling deep tissue imaging with improved contrast.
Part NumberSizePrice1Stock StatusQuantity
FF700-SDi01-25x3625.2 mm x 35.6 mm x 1.1 mm
$595Confirmed AROAdd To Cart

Don’t see a size you need? Create your own custom sized part – delivery confirmed ARO.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
Diameter: mmDimension 1: mm
Dimension 2: mm 
Edge Blacken:
Add To CartPrice Each:
Size Fee:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 50.8mm
Rectangular Dimensions: 5mm - 55mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK

1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
Reflection Band 1 (avg-pol)Ravg > 90% 725 – 1300 nm
Reflection Band 1 (p-pol)Ravg > 85% 730 – 1300 nm
Reflection Band 1 (s-pol)Ravg > 95% 720 – 1300 nm
Edge Wavelength 1700 nm
Transmission Band 1Tavg > 90% 360 – 675 nm

General Filter Specifications
Angle of Incidence45 ± 1.5 degrees
Cone Half-angle2 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index1.71 Understanding ‘Effective Index of Refraction’ neff
Group Delay Dispersion± 1000 fs² over reflection bands for S-Pol and P-Pol
Flatness / RWE ClassificationLaser
Reflected Wavefront Error< 6λ P-V RWE @ 632.8 nm

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
Transverse Dimensions (L x W)25.2 mm x 35.6 mm
Transverse Tolerance± 0.1 mm
Filter Thickness (unmounted)1.05 mm
Filter Thickness Tolerance (unmounted)± 0.05 mm
Clear Aperture≥ 80% (elliptical)
Substrate Thickness (unmounted)1.05 mm
Substrate Thickness Tolerance (unmounted)± 0.05 mm
OrientationReflective surface marked with part number - Orient in direction of incoming light

Tech Note
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers
BrightLine Multiphoton Fluorescence FiltersDescribes how multiphoton microscopy works and how optical filters for multiphoton fluorescence differ from traditional fluorescence filters.
Journal Article
Optical Filters for Multiphoton MicroscopyCraig Hodgson, PhD, and Turan Erdogan, PhD, Semrock, Inc., BioPhotonics, November 2006
Describes how multiphoton microscopy works, several current applications and how optical filters for multiphoton fluorescence differ from traditional fluorescence filters
White Paper
Flatness of Dichroic Beamsplitters Affects Focus and Image QualityAnalysis of how the radius of curvature of a dichroic filter affects focal plane shift, spot size and image fidelity in fluorescence microscopy.
Multiphoton MicroscopyAn overview of multiphoton microscopy, including solutions from Semrock and additional learning resources.

700 Multiphoton Short-pass Dichroic beamsplitter FF700 FF700-SDi01 Short pass Shortpass SWP Short-Wave-Pass Single-edge Sdi Ti:Sapphire 2P 2PE 2PExcitation FF700-SDi01-25x36

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.