Welcome, Guest: Login or Register My Cart (0)
Item has been Discontinued. See Other Parts to Consider tab below.

462/522/607 nm BrightLine® triple-edge dichroic beamsplitter

Part Number: FF462/522/607-Di01-25x36

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Optical Specifications
SpecificationValue
Reflection Band 1Ravg > 95% 430 – 453 nm
Edge Wavelength 1462 nm
Transmission Band 1Tavg > 90% 471 – 489 nm
Reflection Band 2Ravg > 95% 507 – 512 nm
Edge Wavelength 2522 nm
Transmission Band 2Tavg > 90% 532 – 560 nm
Reflection Band 3Ravg > 95% 580 – 595 nm
Edge Wavelength 3607 nm
Transmission Band 3Tavg > 90% 619 – 750 nm

General Filter Specifications
SpecificationValue
Angle of Incidence45 ± 1.5 degrees
Cone Half-angle2 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
SteepnessStandard
Flatness / RWE ClassificationStandard Epi-fluorescence
Reflected Wavefront Error>> 6λ P-V RWE @ 632.8 nm

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (L x W)25.2 mm x 35.6 mm
Transverse Tolerance (mounted)+ 0.0 / - 0.1 mm
Filter Thickness (unmounted)1.05 mm
Filter Thickness Tolerance (unmounted)± 0.05 mm
Clear Aperture≥ 80% (elliptical)
Scratch-Dig60-40
Substrate Thickness (unmounted)1.05 mm
Substrate Thickness Tolerance (unmounted)± 0.05 mm
OrientationReflective surface marked with part number - Orient in direction of incoming light

Closest Alternate Filter

FF459_526_596-Di01.png

459/526/596 nm BrightLine® triple-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edges at 459 nm, 526 nm & 596 nm
• Ravg > 95% 350 – 450 nm, Ravg > 95% 497.6 – 519.5 nm & Ravg > 95% 567.4 – 588.6 nm
• Tavg > 93% 464 – 486 nm, Tavg > 93% 532 – 554 nm & Tavg > 93% 603 – 800 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing available in less than a week (sizing fee applies).
Part # FF459/526/596-Di01-25x36
$465
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Flatness of Dichroic BeamsplittersDescribes the impact of non-flat dichroic beamsplitters on microscope image fidelity
Multiband Filter Set TerminologyCompares benefits and drawbacks of full multiband, pinkel and sedat filter sets

FF462/522/607-Di01 462/522/607

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.