Welcome, Guest: Login or Register My Cart (0)

510/20 nm BrightLine® single-band bandpass filter

Part Number: FF03-510/20-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: FF03-510/20  FF03  510/20
510/20 nm BrightLine® single-band bandpass filter
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
Part NumberSizePrice1Stock StatusQuantity
FF03-510/20-2525 mm x 5.0 mm$405In StockAdd To Cart

Don’t see a size you need? Create your own custom sized part – available in less than a week.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
Housed / Mounted
  
Diameter: mmDimension 1: mm
Dimension 2: mm 
  
Edge Blacken:
  
 Quantity:
Add To CartPrice Each:
Size Fee:
Total:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 50.8mm
Rectangular Dimensions: 5mm - 50.8mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK



1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 93% 500 – 520 nm
Center Wavelength 1510 nm
Guaranteed Minimum Bandwidth 120 nm
FWHM Bandwidth 1 (nominal)25 nm
Blocking Band 1Nominal blocking data is represented by the ASCII spectrum

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index1.88 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)5.0 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 21 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Adjacent Bandpass Filters

FF02-510_10.png

510/10 nm BrightLine® single-band bandpass filter

• Tavg > 93% 505 – 515 nm
• Center Wavelength of 510 nm and GMBW of 10 nm
• FWHM of 15 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF02-510/10-25
$355
(Non-US pricing info)



FF01-510_42.png

510/42 nm BrightLine® single-band bandpass filter

• Tavg > 90% 489 – 531 nm
• Center Wavelength of 510 nm and GMBW of 42 nm
• FWHM of 47 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-510/42-25
$265
(Non-US pricing info)



FF01-510_84.png

510/84 nm BrightLine® single-band bandpass filter

• Tavg > 93% 468 – 552 nm
• Center Wavelength of 510 nm and GMBW of 84 nm
• FWHM of 90 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-510/84-25
$355
(Non-US pricing info)


Edge Filters

BLP01-532R.png

532 nm EdgeBasic™ best-value long-pass edge filter

• Filter with 50% edge at 542 nm
• 458 cm-1 transition
• Tavg > 93% from 546.9 – 900 nm


Custom sizing available in less than a week (sizing fee applies).
Part # BLP01-532R-25
$355
(Non-US pricing info)



FF01-492_SP.png

492 nm blocking edge BrightLine® short-pass filter

• Filter with 50% edge at 483 nm
• Tavg > 90% 400 – 480 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-492/SP-25
$355
(Non-US pricing info)


Dichroic Beamsplitters

FF495-Di03.png

495 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 495 nm
• Ravg > 98% 350 – 488 nm
• Tavg > 93% 502 – 950 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing available in less than a week (sizing fee applies).
Part # FF495-Di03-25x36
$255
(Non-US pricing info)



FF526-Di01.png

526 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 526 nm
• Ravg > 98% 350 – 519.5 nm
• Tavg > 93% 532 – 950 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing available in less than a week (sizing fee applies).
Part # FF526-Di01-25x36
$335
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD

510/20 FF03-510/20 FF03 Bandpass Single-Band FF03-510/20-25

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.