Welcome, Guest: Login or Register My Cart (0)

605/15 nm BrightLine® single-band bandpass filter

Part Number: FF01-605/15-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: FF01-605/15  FF01  605/15
605/15 nm BrightLine® single-band bandpass filter
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
Part NumberSizePrice1Stock StatusQuantity
FF01-605/15-2525 mm x 3.5 mm$355In StockAdd To Cart
FF01-605/15-25-STR25 mm threaded ring for Sutter Lambda filter wheel$375Confirmed AROAdd To Cart
FF01-605/15-3232 mm x 3.5 mm$582Confirmed AROAdd To Cart
FF01-605/15-23.3-D23.3 mm x 2.0 mm
(unmounted)
$355Confirmed AROAdd To Cart

Don’t see a size you need? Create your own custom sized part – delivery confirmed ARO.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
Housed / Mounted
  
Diameter: mmDimension 1: mm
Dimension 2: mm 
  
Edge Blacken:
  
 Quantity:
Add To CartPrice Each:
Size Fee:
Total:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 50.8mm
Rectangular Dimensions: 5mm - 50.8mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK



1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 90% 597.5 – 612.5 nm
Center Wavelength 1605 nm
Guaranteed Minimum Bandwidth 115 nm
FWHM Bandwidth 1 (nominal)22 nm
Blocking Band 1ODavg > 6 200 – 403 nm
Blocking Band 2ODavg > 8 403 – 455 nm (Design specification - measurements are noise-floor limited)
Blocking Band 3ODavg > 5 455 – 582 nm
Blocking Band 4ODavg > 5 628 – 925 nm
Blocking Band 5ODavg > 2 925 – 1100 nm

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index1.82 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)3.5 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 22 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Complementary Set Filters

FF02-435_40.png

435/40 nm BrightLine® single-band bandpass filter

• Tavg > 90% 415 – 455 nm
• Center Wavelength of 435 nm and GMBW of 40 nm
• FWHM of 48.4 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF02-435/40-25
$355
(Non-US pricing info)



FF510-Di02.png

510 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 510 nm
• Ravg > 98% 327 – 488 nm
• Tavg > 93% 515 – 950 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF510-Di02-25x36
$335
(Non-US pricing info)


Adjacent Bandpass Filters

FF01-600_37.png

600/37 nm BrightLine® single-band bandpass filter

• Tavg > 93% 582 – 619 nm
• Center Wavelength of 600.5 nm and GMBW of 37 nm
• FWHM of 41.4 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-600/37-25
$355
(Non-US pricing info)



FF01-605_64.png

605/64 nm BrightLine® single-band bandpass filter

• Tavg > 90% 573 – 637 nm
• Center Wavelength of 605 nm and GMBW of 64 nm
• FWHM of 70.1 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-605/64-25
$355
(Non-US pricing info)



FF01-607_36.png

607/36 nm BrightLine® single-band bandpass filter

• Tavg > 93% 589 – 625 nm
• Center Wavelength of 607 nm and GMBW of 36 nm
• FWHM of 42.5 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-607/36-25
$355
(Non-US pricing info)


Edge Filters

BLP01-633R.png

632.8 nm EdgeBasic™ best-value long-pass edge filter

• Filter with 50% edge at 645 nm
• 385.4 cm-1 transition
• Tavg > 93% from 650.5 – 1200 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # BLP01-633R-25
$375
(Non-US pricing info)



BSP01-532R.png

532 nm EdgeBasic™ best-value short-pass edge filter

• Laser Wavelength = 532 nm
• Filter 50% edge at 522.7 nm
• 458 cm-1 transition
• Tavg > 80% 350 – 400 nm
• Tavg > 93% 400 – 517.1 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # BSP01-532R-25
$425
(Non-US pricing info)


Dichroic Beamsplitters

FF573-Di01.png

573 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 573 nm
• Ravg > 98% 350 – 566 nm
• Tavg > 93% 580 – 950 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF573-Di01-25x36
$275
(Non-US pricing info)



FF635-Di01.png

635 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 635 nm
• Ravg > 94% 507 – 622 nm
• Tavg > 90% 636 – 830 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF635-Di01-25x36
$335
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD

605/15 FF01-605/15 FF01 Bandpass Single-Band FF01-605/15-25 FF01-605/15-32 FF01-605/15-23.3-D FF01-605/15-25-STR

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.