Welcome, Guest: Login or Register My Cart (0)

535/150 nm BrightLine® single-band bandpass filter

Part Number: FF01-535/150-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: FF01-535/150  FF01  535/150
535/150 nm BrightLine® single-band bandpass filter
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
Part NumberSizePrice1Stock StatusQuantity
FF01-535/150-2525 mm x 3.5 mm$405In StockAdd To Cart

Don’t see a size you need? Create your own custom sized part – available in less than a week.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
Housed / Mounted
  
Diameter: mmDimension 1: mm
Dimension 2: mm 
  
Edge Blacken:
  
 Quantity:
Add To CartPrice Each:
Size Fee:
Total:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 50.8mm
Rectangular Dimensions: 5mm - 50.8mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK



1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 93% 460 – 610 nm
Center Wavelength 1535 nm
Guaranteed Minimum Bandwidth 1150 nm
FWHM Bandwidth 1 (nominal)153.9 nm
Blocking Band 1ODavg > 6 300 – 446 nm
Blocking Band 2ODavg > 6 629 – 1200 nm

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index1.92 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / - 0.1 mm
Filter Thickness (Mounted)3.5 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 22 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Adjacent Bandpass Filters

FF01-535_50.png

535/50 nm BrightLine® single-band bandpass filter

• Tavg > 90% 510 – 560 nm
• Center Wavelength of 535 nm and GMBW of 50 nm
• FWHM of 57.1 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-535/50-25
$355
(Non-US pricing info)



FF01-536_40.png

536/40 nm BrightLine® single-band bandpass filter

• Tavg > 93% 516 – 556 nm
• Center Wavelength of 536 nm and GMBW of 40 nm
• FWHM of 45.3 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-536/40-25
$305
(Non-US pricing info)



FF01-537_26.png

537/26 nm BrightLine® single-band bandpass filter

• Tavg > 90% 524 – 550 nm
• Center Wavelength of 537 nm and GMBW of 26 nm
• FWHM of 30.7 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-537/26-25
$405
(Non-US pricing info)


Edge Filters

BLP01-633R.png

632.8 nm EdgeBasic™ best-value long-pass edge filter

• Filter with 50% edge at 645 nm
• 385.4 cm-1 transition
• Tavg > 93% from 650.5 – 1200 nm


Custom sizing available in less than a week (sizing fee applies).
Part # BLP01-633R-25
$355
(Non-US pricing info)



FF01-440_SP.png

440 nm blocking edge BrightLine® short-pass filter

• Filter with 50% edge at 430 nm
• Tavg > 93% 380 – 427 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-440/SP-25
$355
(Non-US pricing info)


Dichroic Beamsplitters

FF452-Di01.png

452 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 452 nm
• Ravg > 90% 423 – 445 nm
• Tavg > 90% 460 – 610 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing available in less than a week (sizing fee applies).
Part # FF452-Di01-25x36
$255
(Non-US pricing info)



FF624-Di01.png

624 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 624 nm
• Ravg > 95% 528 – 610 nm
• Tavg > 93% 630 – 750 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing available in less than a week (sizing fee applies).
Part # FF624-Di01-25x36x2.0
$335
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD

535/150 FF01-535/150 FF01 Bandpass Single-Band FF01-535/150-25

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.