Welcome, Guest: Login or Register My Cart (0)

514/30 nm BrightLine® single-band bandpass filter

Part Number: FF01-514/30-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: FF01-514/30  FF01  514/30
514/30 nm BrightLine® single-band bandpass filter
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
Part NumberSizePrice1Stock StatusQuantity
FF01-514/30-2525 mm x 3.5 mm$355In StockAdd To Cart
FF01-514/30-25-STR25 mm threaded ring for Sutter Lambda filter wheel$375Confirmed AROAdd To Cart
FF01-514/30-23.3-D23.3 mm x 2.0 mm
(unmounted)
$355Confirmed AROAdd To Cart

Don’t see a size you need? Create your own custom sized part – delivery confirmed ARO.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
Housed / Mounted
  
Diameter: mmDimension 1: mm
Dimension 2: mm 
  
Edge Blacken:
  
 Quantity:
Add To CartPrice Each:
Size Fee:
Total:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 50.8mm
Rectangular Dimensions: 5mm - 50.8mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK



1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 93% 499 – 529 nm
Center Wavelength 1514 nm
Guaranteed Minimum Bandwidth 130 nm
FWHM Bandwidth 1 (nominal)36 nm
Blocking Band 1ODavg > 4 275 – 400 nm
Blocking Band 2ODavg > 4 400 – 456 nm
Blocking Band 3ODavg > 8 456 – 483 nm (Design specification - measurements are noise-floor limited)
Blocking Band 4OD > 3.5 490 nm
Blocking Band 5ODavg > 5 543 – 700 nm
Blocking Band 6ODavg > 5 700 – 925 nm

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index1.92 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)3.5 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 22 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Complementary Set Filters

FF01-470_22.png

470/22 nm BrightLine® single-band bandpass filter

• Tavg > 93% 459 – 481 nm
• Center Wavelength of 470 nm and GMBW of 22 nm
• FWHM of 27 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-470/22-25
$325
(Non-US pricing info)



FF493_574-Di01.png

493/574 nm BrightLine® dual-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edges at 493 nm & 574 nm
• Ravg > 95% 456 – 480 nm & Ravg > 95% 541 – 565 nm
• Tavg > 90% 500 – 529 nm & Tavg > 90% 584 – 679 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF493/574-Di01-25x36
$365
(Non-US pricing info)


Adjacent Bandpass Filters

FF01-514_30.png

514/30 nm BrightLine® single-band bandpass filter

• Tavg > 93% 499 – 529 nm
• Center Wavelength of 514 nm and GMBW of 30 nm
• FWHM of 36 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-514/30-25
$355
(Non-US pricing info)



FF01-517_20.png

517/20 nm BrightLine® single-band bandpass filter

• Tavg > 90% 507 – 527 nm
• Center Wavelength of 517 nm and GMBW of 20 nm
• FWHM of 24.8 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-517/20-25
$405
(Non-US pricing info)



FF01-520_5.png

520/5 nm BrightLine® single-band bandpass filter

• Tavg > 93% 517.5 – 522.5 nm
• Center Wavelength of 520 nm and GMBW of 5 nm
• FWHM of 10.2 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-520/5-25
$405
(Non-US pricing info)


Edge Filters

BLP01-568R.png

568 nm EdgeBasic™ best-value long-pass edge filter

• Filter with 50% edge at 579 nm
• 429 cm-1 transition
• Tavg > 93% from 584.1 – 900 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # BLP01-568R-25
$375
(Non-US pricing info)



FF01-492_SP.png

492 nm blocking edge BrightLine® short-pass filter

• Filter with 50% edge at 483 nm
• Tavg > 90% 400 – 480 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-492/SP-25
$405
(Non-US pricing info)


Dichroic Beamsplitters

FF495-Di03.png

495 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 495 nm
• Ravg > 98% 350 – 488 nm
• Tavg > 93% 502 – 950 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF495-Di03-25x36
$255
(Non-US pricing info)



FF538-FDi01.png

538 nm edge BrightLine® single-edge image-splitting dichroic beamsplitter for standard microscopy

• Imaging Dichroic Beamsplitter with edge at 538 nm
• Ravg > 95% 350 – 528.4 nm
• Tavg > 93% 547.7 – 950 nm
•Common Fluorophore Pair to Split: GFP/mOrange
• Flatness / RWE: Image-splitting


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF538-FDi01-25x36
$365
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD

514/30 FF01-514/30 FF01 Bandpass Single-Band FF01-514/30-25 FF01-514/30-23.3-D FF01-514/30-25-STR

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.