Welcome, Guest: Login or Register My Cart (0)
Item has been Discontinued. See Other Parts to Consider tab below.

484/543/702 nm BrightLine® triple-band bandpass filter

Part Number: FF01-484/543/702-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 93% 474 – 494.5 nm
Center Wavelength 1484 nm
Guaranteed Minimum Bandwidth 120.5 nm
FWHM Bandwidth 1 (nominal)25.8 nm
Transmission Band 2Tavg > 93% 532 – 554 nm
Center Wavelength 2543 nm
Guaranteed Minimum Bandwidth 222 nm
FWHM Bandwidth 2 (nominal)27.2 nm
Transmission Band 3Tavg > 93% 603 – 800 nm
Center Wavelength 3702 nm
Guaranteed Minimum Bandwidth 3197 nm
FWHM Bandwidth 3 (nominal)201.3 nm
Blocking Band 1ODavg > 4 200 – 421 nm
Blocking Band 2ODavg > 8 421 – 462.5 nm (Design specification - measurements are noise-floor limited)
Blocking Band 3OD > 3.5 468.3 nm
Blocking Band 4OD > 3.5 500.5 nm
Blocking Band 5ODavg > 8 506.5 – 519.5 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6OD > 3.5 525.8 nm
Blocking Band 7OD > 3.5 560.7 nm
Blocking Band 8ODavg > 8 567.4 – 588.6 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9OD > 3.5 585.9 nm
Blocking Band 10ODavg > 5 811.6 – 900 nm

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index2.03 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)3.5 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 22 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Complementary Set Filters

FF01-442_42.png

442/42 nm BrightLine® single-band bandpass filter

• Tavg > 93% 421 – 462.5 nm
• Center Wavelength of 441.5 nm and GMBW of 41.5 nm
• FWHM of 46.2 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-442/42-25
$355
(Non-US pricing info)



FF01-513_13.png

513/13 nm BrightLine® single-band bandpass filter

• Tavg > 93% 506.5 – 519.5 nm
• Center Wavelength of 513 nm and GMBW of 13 nm
• FWHM of 17.5 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-513/13-25
$355
(Non-US pricing info)



FF01-578_21.png

578/21 nm BrightLine® single-band bandpass filter

• Tavg > 93% 567.4 – 588.6 nm
• Center Wavelength of 578 nm and GMBW of 21.2 nm
• FWHM of 26.1 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-578/21-25
$355
(Non-US pricing info)



FF468_526_596-Di01.png

468/526/596 nm BrightLine® triple-edge dichroic beamsplitter

• Dichroic Beamsplitter with edges at 468 nm, 526 nm & 596 nm
• Ravg > 95% 350 – 462.5 nm, Ravg > 95% 506.5 – 519.5 nm & Ravg > 95% 567.5 – 588.6nm
• Tavg > 93% 474 – 494.5 nm, Tavg > 93% 532 – 554 nm & Tavg > 93% 603 – 800 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF468/526/596-Di01-25x36
$465
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set TerminologyCompares benefits and drawbacks of full multiband, pinkel and sedat filter sets

484/543/702 FF01-484/543/702

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.