Welcome, Guest: Login or Register My Cart (0)
Item has been Discontinued. See Other Parts to Consider tab below.

446/515/588/700 nm BrightLine® quad-band bandpass filter

Part Number: FF01-446/515/588/700-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 93% 429.5 – 462.0 nm
Center Wavelength 1445.8 nm
Guaranteed Minimum Bandwidth 132.5 nm
FWHM Bandwidth 1 (nominal)36.4 nm
Transmission Band 2Tavg > 93% 503.5 – 526.5 nm
Center Wavelength 2515 nm
Guaranteed Minimum Bandwidth 223 nm
FWHM Bandwidth 2 (nominal)28.1 nm
Transmission Band 3Tavg > 93% 560 – 615.5 nm
Center Wavelength 3587.8 nm
Guaranteed Minimum Bandwidth 355.5 nm
FWHM Bandwidth 3 (nominal)60.1 nm
Transmission Band 4Tavg > 93% 665.5 – 735.5 nm
Center Wavelength 4700.5 nm
Guaranteed Minimum Bandwidth 470 nm
FWHM Bandwidth 4 (nominal)75.2 nm
Blocking Band 1ODavg > 6 200 – 370 nm
Blocking Band 2ODavg > 8 370 – 410 nm (Design specification - measurements are noise-floor limited)
Blocking Band 3OD > 3.5 419.8 nm
Blocking Band 4OD > 3.5 467.5 nm
Blocking Band 5ODavg > 8 473 – 491 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6OD > 3.5 497.3 nm
Blocking Band 7OD > 3.5 532.7 nm
Blocking Band 8ODavg > 8 539.5 – 546.5 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9OD > 3.5 553.5 nm
Blocking Band 10OD > 3.5 624.3 nm
Blocking Band 11ODavg > 8 632.8 – 647.1 nm (Design specification - measurements are noise-floor limited)
Blocking Band 12OD > 3.5 657.3 nm
Blocking Band 13ODavg > 5 750 – 900 nm
Blocking Band 14ODavg > 5 1086 nm

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index2.2 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)3.5 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 22 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Complementary Set Filters: Exciters & Dichroic

FF01-390_40.png

390/40 nm BrightLine® single-band bandpass filter

• Tavg > 93% 370 – 410 nm
• Center Wavelength of 390 nm and GMBW of 40 nm
• FWHM of 44.6 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-390/40-25
$325
(Non-US pricing info)



FF02-482_18.png

482/18 nm BrightLine® single-band bandpass filter

• Tavg > 93% 473 – 491 nm
• Center Wavelength of 482 nm and GMBW of 18 nm
• FWHM of 24.4 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF02-482/18-25
$325
(Non-US pricing info)



FF01-640_14.png

640/14 nm BrightLine® single-band bandpass filter

• Tavg > 93% 633 – 647 nm
• Center Wavelength of 640 nm and GMBW of 14 nm
• FWHM of 20.2 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-640/14-25
$405
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set TerminologyCompares benefits and drawbacks of full multiband, pinkel and sedat filter sets

446/515/588/700 FF01-446/515/588/700

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.