Welcome, Guest: Login or Register My Cart (0)

441/511/593/684/817 nm BrightLine® penta-band bandpass filter

Part Number: FF01-441/511/593/684/817-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: FF01-441/511/593/684/817  FF01  441/511/593/684/817
441/511/593/684/817 nm BrightLine® penta-band bandpass filter
Individual multiband fluorescence bandpass filters that utilize Semrock's patented single-substrate construction. These filters have extremely high transmission, steep and well-defined edges, and outstanding blocking between the passbands. All thin-film, hard-coated construction for unsurpassed performance and reliability.

BrightLine emitter for DAPI/FITC/TRITC/Cy5/Cy7 imaging channels optimized for Lumencor CELESTA light engine® utilizing 408 nm, 473 nm, 545 nm, 635 nm & 750 nm wavelengths.
Part NumberSizePrice1Stock StatusQuantity
FF01-441/511/593/684/817-25New Product25 mm x 3.5 mm$795In StockAdd To Cart

Don’t see a size you need? Create your own custom sized part – delivery confirmed ARO.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
Housed / Mounted
  
Diameter: mmDimension 1: mm
Dimension 2: mm 
  
Edge Blacken:
  
 Quantity:
Add To CartPrice Each:
Size Fee:
Total:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 50.8mm
Rectangular Dimensions: 5mm - 50.8mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK



1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 90% 426 – 456 nm
Center Wavelength 1441 nm
Guaranteed Minimum Bandwidth 130 nm
FWHM Bandwidth 1 (nominal)36.1 nm
Transmission Band 2Tavg > 90% 498 – 524 nm
Center Wavelength 2511 nm
Guaranteed Minimum Bandwidth 226 nm
FWHM Bandwidth 2 (nominal)34.3 nm
Transmission Band 3Tavg > 90% 574 – 611 nm
Center Wavelength 3592.5 nm
Guaranteed Minimum Bandwidth 337 nm
FWHM Bandwidth 3 (nominal)45.2 nm
Transmission Band 4Tavg > 90% 667 – 701 nm
Center Wavelength 4684 nm
Guaranteed Minimum Bandwidth 434 nm
FWHM Bandwidth 4 (nominal)44.4 nm
Transmission Band 5Tavg > 90% 784 – 850 nm
Center Wavelength 5817 nm
Guaranteed Minimum Bandwidth 566 nm
FWHM Bandwidth 5 (nominal)78.8 nm
Blocking Band 1ODavg > 4 200 – 275 nm (Design specification - measurements are noise-floor limited)
Blocking Band 2ODavg > 4 275 – 369 nm
Blocking Band 3ODavg > 8 369 – 413 nm (Design specification - measurements are noise-floor limited)
Blocking Band 4OD > 3.5 420 nm
Blocking Band 5OD > 3.5 463 nm
Blocking Band 6ODavg > 8 471 – 483 nm (Design specification - measurements are noise-floor limited)
Blocking Band 7OD > 3.5 491 nm
Blocking Band 8OD > 3.5 532 nm
Blocking Band 9ODavg > 8 541 – 557 nm (Design specification - measurements are noise-floor limited)
Blocking Band 10OD > 3.5 566 nm
Blocking Band 11OD > 3.5 620 nm
Blocking Band 12ODavg > 8 630 – 647 nm (Design specification - measurements are noise-floor limited)
Blocking Band 13OD > 3.5 657.5 nm
Blocking Band 14OD > 3.5 712 nm
Blocking Band 15ODavg > 8 725 – 757 nm (Design specification - measurements are noise-floor limited)
Blocking Band 16OD > 3.5 771 nm
Blocking Band 17ODavg > 5 900 – 1080 nm
Blocking Band 18ODavg > 2 1080 – 1100 nm

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index1.90 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)3.5 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 22 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Complementary Set Filters: Exciter & Dichroic

FF01-391_477_549_639_741.png

391/477/549/639/741 nm BrightLine® penta-band bandpass filter

• Tavg > 85% 369 – 413 nm, Tavg > 90% 471 – 483 nm, Tavg > 90% 541 – 557 nm, Tavg > 90% 630 – 647 nm & Tavg > 90% 725 – 757 nm
• Center Wavelengths of 391nm, 477 nm, 549 nm, 639 nm & 741 nm and GMBWs of 44 nm, 12 nm, 16 nm, 17 nm & 32 nm
• Optimized for Lumencor CELESTA light engine® utilizing 408 nm, 473 nm, 545 nm, 635 nm & 750 nm wavelengths


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-391/477/549/639/741-25
$795
(Non-US pricing info)



FF421_491_567_659_776-Di01.png

421/491/567/659/776 nm BrightLine® penta-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edges at 421 nm, 491 nm, 567 nm, 659 nm & 776 nm
• Ravg > 95% 369 – 413 nm, Ravg > 95% 471 – 483 nm, Ravg > 95% 541 – 557 nm, Ravg > 95% 630 – 647 nm & Ravg > 95% 725 – 757 nm
• Tavg > 93% 426 – 456 nm, Tavg > 93% 498 – 524 nm, Tavg > 93% 574 – 611 nm, Tavg > 93% 667 – 701 nm & Tavg > 93% 784 – 850 nm
• Flatness / RWE: Standard Epi-fluorescence
• Optimized for Lumencor CELESTA light engine® utilizing 408 nm, 473 nm, 545 nm, 635 nm & 750 nm wavelengths


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF421/491/567/659/776-Di01-25x36
$795
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set TerminologyCompares benefits and drawbacks of full multiband, pinkel and sedat filter sets

441/511/593/684/817 FF01-441/511/593/684/817 FF01 Bandpass Multibandpass Penta-Band Penta-Bandpass Penta Lumencor Celesta CELESTA FF01-441/511/593/684/817-25

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.