Items in your cart:
There are 0 items in your cart

405/10 nm BrightLine® single-band bandpass filter

Part Number: FF01-405/10-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: FF01-405/10  FF01  405/10
405/10 nm BrightLine® single-band bandpass filter
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
Part NumberSizePrice1Stock StatusQuantity
FF01-405/10-2525 mm x 5.0 mm$355In StockAdd To Cart

Don’t see a size you need? Create your own custom sized part – available in less than a week.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
Housed / Mounted
  
Diameter: mmDimension 1: mm
Dimension 2: mm 
  
Edge Blacken:
  
 Quantity:
Add To CartPrice Each:
Size Fee:
Total:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 50.8mm
Rectangular Dimensions: 5mm - 50.8mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK



1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 87% 400 – 410 nm
Center Wavelength 1405 nm
Guaranteed Minimum Bandwidth 110 nm
FWHM Bandwidth 1 (nominal)14.1 nm
Blocking Band 1Nominal blocking data is represented by the ASCII spectrum

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Effective Index1.88

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)5.0 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 21 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)3.5 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Adjacent Bandpass Filters

FF01-400_40.png

400/40 nm BrightLine® single-band bandpass filter

• Tavg > 90% 380 – 420 nm
• Center Wavelength of 400 nm and GMBW of 40 nm
• FWHM of 47.5 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-400/40-25
$355
(Non-US pricing info)



FF01-405_150.png

405/150 nm BrightLine® single-band bandpass filter

• Tavg > 90% 330 – 480 nm
• Center Wavelength of 405 nm and GMBW of 150 nm
• FWHM of 158.3 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-405/150-25
$355
(Non-US pricing info)



FF01-406_15.png

406/15 nm BrightLine® single-band bandpass filter

• Tavg > 85% 398.5 – 413.5 nm
• Center Wavelength of 406 nm and GMBW of 15 nm
• FWHM of 20 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-406/15-25
$305
(Non-US pricing info)


Edge Filters

FF01-430_LP.png

430 nm blocking edge BrightLine® long-pass filter

• Filter with 50% edge at 437 nm
• Tavg > 90% 439 – 900 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-430/LP-25
$355
(Non-US pricing info)



FF01-390_SP.png

390 nm blocking edge BrightLine® short-pass filter

• Filter with 50% edge at 378 nm
• Tavg > 70% 320 – 370 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF01-390/SP-25
$405
(Non-US pricing info)


Dichroic Beamsplitters

FF390-Di01.png

390 nm edge BrightLine® single-edge dichroic beamsplitter

• Dichroic Beamsplitter with edge at 390 nm
• Ravg > 95% 335 – 375 nm
• Tavg > 90% 399 – 500 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF390-Di01-25x36
$255
(Non-US pricing info)



FF416-Di01.png

416 nm edge BrightLine® single-edge dichroic beamsplitter

• Dichroic Beamsplitter with edge at 416 nm
• Ravg > 90% 360 – 407 nm
• Tavg > 90% 425 – 575 nm


Custom sizing available in less than a week (sizing fee applies).
Part # FF416-Di01-25x36
$235
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.

405/10 FF01-405/10 FF01 Bandpass Single-Band FF01-405/10-25

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.