Welcome, Guest: Login or Register My Cart (0)
Item has been Discontinued. See Other Parts to Consider tab below.

392/18 nm BrightLine® single-band bandpass filter

Part Number: FF01-392/18-25

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Optical Specifications
SpecificationValue
Transmission Band 1Tavg > 93% 383 – 401 nm
Center Wavelength 1392 nm
Guaranteed Minimum Bandwidth 118 nm
FWHM Bandwidth 1 (nominal)23.1 nm
Blocking Band 1ODavg > 6 200 – 375 nm
Blocking Band 2ODavg > 10 341 – 371 nm (Design specification - measurements are noise-floor limited)
Blocking Band 3OD > 3.5 377 nm
Blocking Band 4ODavg > 6 409 – 925 nm
Blocking Band 5ODavg > 6 441 – 458 nm
Blocking Band 6ODavg > 6 486 – 490 nm
Blocking Band 7ODavg > 6 530 – 534 nm
Blocking Band 8ODavg > 6 560 – 568 nm
Blocking Band 9ODavg > 6 630 – 645 nm
Blocking Band 10ODavg > 6 680 – 690 nm
Blocking Band 11ODavg > 2 925 – 1100 nm

General Filter Specifications
SpecificationValue
Angle of Incidence0 ± 5 degrees
Cone Half-angle7 degrees
Optical Damage RatingTesting has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index1.96 Understanding ‘Effective Index of Refraction’ neff

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (Diameter)25 mm
Transverse Tolerance (mounted)+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)3.5 mm
Filter Thickness Tolerance (Mounted)± 0.1 mm
Clear Aperture≥ 22 mm
Scratch-Dig60-40
Substrate Thickness (unmounted)2.0 mm
Substrate Thickness Tolerance (unmounted)± 0.1 mm
OrientationArrow on ring indicates preferred direction of propagation of light

Complementary Set Filters

FF01-356_30.png

356/30 nm BrightLine® single-band bandpass filter

• Tavg > 85% 341.0 – 371.0 nm
• Center Wavelength of 356 nm and GMBW of 30 nm
• FWHM of 33.9 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-356/30-25
$405
(Non-US pricing info)



FF376-Di01.png

376 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 376 nm
• Ravg > 98% 327 – 371 nm
• Tavg > 93% 381 - 950 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF376-Di01-25x36
$275
(Non-US pricing info)


Adjacent Bandpass Filters

FF01-390_40.png

390/40 nm BrightLine® single-band bandpass filter

• Tavg > 93% 370 – 410 nm
• Center Wavelength of 390 nm and GMBW of 40 nm
• FWHM of 44.6 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-390/40-25
$325
(Non-US pricing info)



FF01-392_23.png

392/23 nm BrightLine® single-band bandpass filter

• Tavg > 93% 381.0 – 404.0 nm
• Center Wavelength of 392.5 nm and GMBW of 23 nm
• FWHM of 26.7 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-392/23-25
$355
(Non-US pricing info)



FF01-395_11.png

395/11 nm BrightLine® single-band bandpass filter

• Tavg > 85% 389.5 – 400.5 nm
• Center Wavelength of 395 nm and GMBW of 11 nm
• FWHM of 16.1 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-395/11-25
$405
(Non-US pricing info)


Edge Filters

BLP01-405R.png

405 nm EdgeBasic™ best-value long-pass edge filter

• Filter with 50% edge at 418 nm
• 595 cm-1 transition
• Tavg > 93% from 421.5 – 900 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # BLP01-405R-25
$375
(Non-US pricing info)



FF01-390_SP.png

390 nm blocking edge BrightLine® short-pass filter

• Filter with 50% edge at 378 nm
• Tavg > 70% 320 – 370 nm


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF01-390/SP-25
$455
(Non-US pricing info)


Dichroic Beamsplitters

FF409-Di03.png

409 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

• Dichroic Beamsplitter with edge at 409 nm
• Ravg > 98% 327 – 404 nm
• Tavg > 93% 415 - 950 nm
• Flatness / RWE: Standard Epi-fluorescence


Custom sizing delivery confirmed ARO (sizing fee applies).
Part # FF409-Di03-25x36
$275
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Tech Note
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD

392/18 BUV395 FF01-392/18

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.