Items in your cart:
There are 0 items in your cart

532 nm laser BrightLine® single-edge laser-flat dichroic beamsplitter

Part Number: Di02-R532-25x36

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: Di02-R532  Di02  R532
532 nm laser BrightLine® single-edge laser-flat dichroic beamsplitter
The perfect beamsplitters for the most popular lasers used in fluorescence imaging, including newer all-solid-state lasers. All beamsplitters in this category have exceptional reflectance at the laser wavelengths, improved ("laser-grade") flatness, and anti-reflection (AR) coatings to minimize imaging artifacts resulting from the coherent laser light.

Interested in an improved flatness version?
λ/2 P-V per inch flatness on 1mm Di03-R532-t1 now available
λ/10 P-V per inch flatness on 3mm Di03-R532-t3 now available
Part NumberSizePrice1Stock StatusQuantity
Di02-R532-25x3625.2 mm x 35.6 mm x 1.1 mm
(unmounted)
$405In StockAdd To Cart

Don’t see a size you need? Create your own custom sized part – available in less than a week.

Select Shape & Dimensions:
Diameter Unhoused / Unmounted
Rectangular Unhoused / Unmounted
  
Diameter: mmDimension 1: mm
Dimension 2: mm 
  
Edge Blacken:
  
 Quantity:
Add To CartPrice Each:
Size Fee:
Total:
Custom sized parts are non-returnable.
Add To Cart
Custom Sizing Limits:
Diameter Range: 5mm - 50.8mm
Rectangular Dimensions: 5mm - 55mm

Substrate thickness/tolerance as listed on Specifications tab.
Dimensional tolerances are ±0.1mm for unhoused parts.

For sizes outside the limits listed above, please contact customer service at 1-866-SEMROCK



1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
SpecificationValue
Reflection Band 1Rabs > 94% 514 – 532 nm
Reflection Band 1 (p-pol)Rabs > 90% 514 – 532 nm
Reflection Band 1 (s-pol)Rabs > 98% 514 – 532 nm
Reflection Band 2Ravg > 90% 350 – 514 nm
Edge Wavelength 1536.8 nm
Transmission Band 1Tavg > 93% 541.6 – 1200 nm
Laser Wavelengths 1514.5 nm, 532 nm

General Filter Specifications
SpecificationValue
Angle of Incidence45 degrees with a shift of 0.35%/degree (40 – 50 degrees)
Cone Half-angle0.5 degrees
Optical Damage Rating1 J/cm² @ 532 nm (10 ns pulse width)
FlatnessLaser Flat
SteepnessSteep
Effective Index1.86

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (L x W)25.2 mm x 35.6 mm
Transverse Tolerance± 0.1 mm
Filter Thickness (unmounted)1.05 mm
Filter Thickness Tolerance (unmounted)± 0.05 mm
Clear Aperture≥ 80% (elliptical)
Scratch-Dig60-40
Substrate TypeFused Silica
Substrate Thickness (unmounted)1.05 mm
Substrate Thickness Tolerance (unmounted)± 0.05 mm
OrientationReflective surface marked with part number - Orient in direction of incoming light

Laser Clean-up Filters

LL01-532.png

532 nm MaxLine® laser clean-up filter

• Laser Wavelength = 532 nm
• Tabs > 90% 532 nm
• FWHM of 2.0 nm (typical); 3.7 nm (maximum)


Custom sizing available in less than a week (sizing fee applies).
Part # LL01-532-12.5
$305
(Non-US pricing info)


Edge Filters

BLP01-532R.png

532 nm EdgeBasic™ best-value long-pass edge filter

• Filter with 50% edge at 542 nm
• 458 cm-1 transition
• Tavg > 93% from 546.9 – 900 nm


Custom sizing available in less than a week (sizing fee applies).
Part # BLP01-532R-25
$355
(Non-US pricing info)


Notch Filters

NF03-532E.png

532 nm StopLine® single-notch filter

• Laser Wavelength = 532 nm
• Typical Notch Bandwidth = 17 nm
• ODabs > 6 532 nm


Custom sizing available in less than a week (sizing fee applies).
Part # NF03-532E-25
$845
(Non-US pricing info)


Dichroic Beamsplitters

LPD02-532RU.png

532 nm RazorEdge Dichroic™ laser-flat beamsplitter

• Laser Wavelength = 532 nm
• 186 cm-1 transition
• Tavg > 93% 538.9 – 824.8 nm


Custom sizing available in less than a week (sizing fee applies).
Part # LPD02-532RU-25
$575
(Non-US pricing info)



NFD01-532.png

532 nm StopLine® notch dichroic beamsplitter

• Laser Wavelength = 532 nm
• R > 98% 532 nm
• Tavg > 90% 350 – 507.5 nm & 570 – 1600 nm


Custom sizing available in less than a week (sizing fee applies).
Part # NFD01-532-25x36
$695
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.

532 Laser Flat Dichroic Beamsplitter Di02-R532 R532 Laser-Flat Single-edge Di02-R Di02-R532-25x36

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.