We are experiencing weather related phone issues, if you cannot reach us try again or email Semrock@idexcorp.com

Items in your cart:
There are 0 items in your cart

445/515/561 nm Yokogawa dichroic beamsplitter

Part Number: Di01-T445/515/561-13x15x0.5

Left-click & drag to zoom. Right-click to save, print or reset

  • Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
Semrock Optical Filter: Di01-T445/515/561  Di01  T445/515/561
445/515/561 nm Yokogawa dichroic beamsplitter
Combining superior performance with exceptional durability, these filters are specifically optimized for use with all Yokogawa CSU spinning-disk scan head system configurations.
Part NumberSizePrice1Stock StatusQuantity
Di01-T445/515/561-13x15x0.513 mm x 15 mm x 0.5 mm
(unmounted)
$665In StockAdd To Cart


This part is not available for custom sizing.


1) US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.
Optical Specifications
SpecificationValue
Reflection Band 1Ravg > 95% 462 – 501 nm
Edge Wavelength 1445 nm
Transmission Band 1Tavg > 90% 441 – 449 nm
Reflection Band 2Ravg > 95% 532 – 544 nm
Edge Wavelength 2515 nm
Transmission Band 2Tavg > 90% 513 – 517 nm
Reflection Band 3Ravg > 95% 578 – 630 nm
Edge Wavelength 3561 nm
Transmission Band 3Tavg > 90% 559 – 563 nm

General Filter Specifications
SpecificationValue
Laser Wavelength 1441 – 449 nm
Laser Wavelength 2513 – 517 nm
Laser Wavelength 3559 – 563 nm
Angle of Incidence45 ± 1.5 degrees
Cone Half-angle0.5 degrees
Optical Damage RatingNot Tested
FlatnessLaser Flat
SteepnessSteep
Effective Index1.84

Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
SpecificationValue
Transverse Dimensions (L x W)13.0 mm x 15.0 mm
Transverse Tolerance+ 0.0 / - 0.2 mm
Filter Thickness (unmounted)0.5 mm
Filter Thickness Tolerance (unmounted)± 0.02 mm
Clear Aperture≥ 80% (elliptical)
Scratch-Dig40-20
Substrate TypeFused Silica
Substrate Thickness (unmounted)0.5 mm
Substrate Thickness Tolerance (unmounted)± 0.02 mm
OrientationUnmarked (reflective coating towards sample)

Notch Filters

NF01-445_515_561.png

445/515/561 nm StopLine® triple-notch filter

• Laser Wavelength = 440 - 450 nm, 514 - 516 nm & 560 – 562 nm
• ODabs > 5 440 - 450 nm, ODabs > 4 514 - 516 nm & ODabs > 4 560 – 562 nm


Custom sizing available in less than a week (sizing fee applies).
Part # NF01-445/515/561-25x5.0
$945
(Non-US pricing info)


[x]
US domestic pricing only. If you are ordering from outside the US, please contact your nearest regional distributor for the correct list price.

445/515/561 nm Yokogawa CSU dichroic Beamsplitter Di01-T445/515/561 Multi-edge Triple-Edge Di01-T Di01-T445/515/561-13x15x0.5

The item has been added to your shopping cart.

The item has been added to your shopping cart, however, your IP address appears to be outside the US/ Canada, so online/ direct orders from Semrock are not allowed. Please see the International Distributor page to find your non-US distributor.

We apologize for any inconvenience.

The shopping cart is offline. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.

Selected option not available online. Please call toll-free 1-866-SEMROCK (866-736-7625) or email us to place your order.