Semrock

FITC/TXRED-A Full Dual-band Filter Set

Optimized for these fluorophores

Green: FITC, GFP, rsGFP, Bodipy, Alexa Fluor 488
Red: Texas Red®, mCherry, Alexa Fluor 568 & 594

Complete list of fluorophores for this filter set

Actual measured data from typical filters




Exciter	Dichroic	Emitter
ASCII Data	ASCII Data	ASCII Data

Set description

This new "full-multiband" filter set allows for simultaneous direct viewing or imaging with a color camera. Popular 2-fluorophore combinations include FITC/Texas Red and GFP/mCherry. For a "Pinkel" version of this filter set (replaces the dual-band emitter with two single-band emitters) see the FITC/TXRED-2X-A set, and for a "Sedat" version of this set (replaces the dual-band emitter and exciter with two single-band emitters and two single-band exciters) see the FITC/TXRED-2X2M-A set

Filter	Average Transmission	Center Wavelengths	Bandwidths *
Exciter	> 90%, 90%	479, 585 nm	38, 27 nm
Emitter	> 90%, 90%	524, 628 nm	29, 33 nm
	Average Reflection	Reflection Bands	Transmission Bands
Dichroic	> 95% > 95%	458 - 499 nm 570 - 600 nm	509 - 541 nm 612 - 647 nm

* Bandwidth is the minimum width over which the average transmission exceeds the specified passband transmission; the nominal full-width-at-half-maximum (FWHM) is approximately the Bandwidth + 1% of the Center Wavelength.